EWXM8-※-RJ45S/EN62/HBK/TSL
| Ordering Information | |
| Model | EWXM8-※-RJ45S/EN62/HBK/TSL |
| Digit | 8 |
| Product Description | M12 Angled Pin EtherNet Pre-injected Connector, Shielded |
| Connection Method | M12×1,RJ45×1 |
| Error-proofing Plug Code | X-code |
| Product Attributes | Product Type | Data Connector |
| Extreme Number | 8 | |
| Type | Public End | |
| Block | Block | |
| Error-proofing Plug Code | X-code | |
| Joint angle | 90° | |
| Electrical Parameters | Rated voltage | 48V |
| Rated current | 0.5A | |
| Contact resistance | ≤5mΩ | |
| Insulation Resistance | ≥100MΩ | |
| Pollution Level | 3 | |
| Shielding Performance | come | |
| Mechanical Properties | Contact Material | Brass |
| Surface Material of Contact Parts | Gold-plated | |
| Carrier Material of Contact Parts | Nylon or TPU | |
| Material of locking device | Die-cast zinc plated with nickel | |
| Injection-molded body material | TPU | |
| Color of the injection-molded part | Black | |
| Seal Material | FPM/FKM | |
| Number of insertion | ≥100 | |
| Protection Rating | IP67 | |
| Ambient temperature | -25 °C ... 85 °C | |
| Tightening torque | 0.4 Nm | |
| Standard | IEC 61076-2-101 | |
| Cable | Cable Material Designation | 19810008 |
| Cable Construction | 4×2×0.14mm² | |
| AWG | 4x2x26AWG+Shield | |
| Cable length | 2m | |
| Block | There is | |
| Shielding Structure | Tin-plated metal mesh weave + aluminum foil | |
| Weave Density | ≥80% | |
| Cable Outer Diameter | 6.5±0.2mm | |
| Sheath Material | PUR | |
| Jacket Color | Yellow/Green | |
| Conductor insulation material | PE | |
| Minimum bend radius, fixed installation | 5×D | |
| Minimum bending radius, drag chain installation | 10×D |
Previous Page
Next Page
Previous Page
Next Page
Accessories Instruction
-
6.3MB
-
863.8KB
Related Accessories