MT20R-El-GW
| Ethernet/IP Coupler Module Features: ·2 RJ45 ports, 100 Mbit/s ·Expandable to 32 different R-series modules ·Compact design saves more installation space ·Removable terminals, supporting tool-free installation |
|||||
| Business Data | ||
| Order Number | Model | Specifications |
| 40003002 | MT20R-El-GW | MT20R Coupler Module,Ethernet/IP,DC24V |
| Basic Parameters | ||
| Model | MT20R-EI-GW | |
| Protection Rating | IP20 | |
| Dimensions (L × W × H) | 104×24×86mm | |
| Weight | 140g | |
| Operating Temperature | -25℃..70℃ | |
| Operating Humidity | 5%.…95% | |
| Operating Atmospheric Pressure | 80KPa...106KPa | |
| Technical Specifications | ||
| Physical Layer | Ethernet | |
| Transmission speed | 10/100 Mbps,Full-duplex | |
| Communication Protocol | Ethernet/IP | |
| Minimum cycle time | 10ms | |
| Communication Interface | 2×RJ45 | |
| Internal bus speed | highest1.5Mbps | |
| Diagnosis Upload | Support | |
| System Power Supply | 18.….30 VDC(type.24VDC) | |
| Total current | ≤6A | |
| Static operating current | ≤500mA | |
| Short-circuit/Reverse-polarity Protection | Support | |
| Firmware Upgrade | Support | |
| Hot-Swap | Support | |
| Isolation | Optocoupler Isolation | |
| Indicator light | ||
| RJ45 | Green steady: Connected to network Yellow flashing: Sending or receiving data Off: Connection not established |
|
| PWR | Off: No power supply Green light: Power supply normal |
|
| MS | Green steady: Module normal Green flashing: Module not configured Red steady: Module fault |
|
| NS | Green steady: Network status normal Green flashing: Communication not established Red flashing: Communication interrupted |
|
| MOD | Green steady: Initialization complete Red steady: Submodule configuration mismatch Red flashing: Submodule operational error |
|
Previous Page
Next Page
Previous Page
Next Page
Accessories Instruction
Related Accessories