MT20X-EC-GW
| EtherCAT Coupler Module Product Features: ●2 RJ45 ports, 100 Mbit/s ●Expandable with up to 32 different X-series modules ●Compact size saves more installation space ●Internal bus speed can reach up to 100 Mbps |
||||||
| Business Data | ||||||
| Order Number | Model | Specifications | ||||
| 40004001 | MT20X-EC-GW | MT20X Coupler Module, EtherCAT,DC24V | ||||
| 40004005 | MT20X-EC-GW01 | MT20X Coupler Module with Dual RJ45 Connectors, Power Supply Board Included, 1.6mm Bayonet Mount | ||||
| 40004007 | MT20X-EC-GW02 | MT20X Coupler Module with Dual RJ45 Connectors, Power Supply Board Included, 2.0mm Bayonet Mount | ||||
| 40004012 | MT20X-EC-GW03 | MT20X Coupler Module with Dual RJ45 Connectors, Power Supply Board Included, 1.6mm Bay (The entire module occupies one node) |
||||
| 40004013 | MT20X-EC-GW04 | MT20X Coupler Module with Dual RJ45 Connectors, Power Supply Board Included, 2.0mm Bayonet Mount (The entire module occupies one node) |
||||
| Basic Parameters | ||||||
| Model | MT20X-EC-GW | MT20X-EC-GW01 | MT20X-EC-GW02 | MT20X-EC-GW03 | MT20X-EC-GW04 | |
| Protection Rating | IP20 | |||||
| Dimensions (L × W × H) | 70.4×12×65.5mm | 70.4×44×65.5mm | 70.4×44×65.5mm | 70.4×44×65.5mm | 70.4×44×65.5mm | |
| Weight | 35g | 75g | ||||
| Operating Temperature | -25°℃….70℃ | |||||
| Operating Humidity | 5%.…95% | |||||
| Operating Atmospheric Pressure | 80KPa...106KPa | |||||
| Technical Specifications | ||||||
| Physical Layer | Ethernet | |||||
| Transmission Speed | 10/100 Mbps,Full-duplex | |||||
| Communication Protocol | EtherCAT | |||||
| Input Process Data | - | 4 Byte | ||||
| Minimum Cycle Time | 1ms | |||||
| Communication Interface | 无 | 2×RJ45 | ||||
| Number of EtherCAT Nodes | 1+Number of extension plates | 1 | ||||
| Internal Bus Speed | Up to 100 Mbps | |||||
| Diagnostic Upload | Support | |||||
| System Power Supply | 18.….30 VDC(type.24VDC) | |||||
| Total Current | ≤6A | |||||
| Static Operating Current | ≤150mA | |||||
| Short-Circuit/Reverse-Connection Protection | Support | |||||
| Firmware Version Upgrade | Support | |||||
| Indicator light | ||||||
| RUN | Constant off: INT Green fast flash: PRE-OP Green slow flash: SAFE-OP Green steady on: OP Off: Fault |
|||||
| L/A | Constant off: Connector not connected Green flashing: Connector in normal data communication |
|||||
| Us | Constant off: 24VUs abnormal Green steady on: 24VUs normal |
|||||
| XO/X1 | Green light steady: Established a valid network connection Yellow light flashing: Normal data communication |
|||||
Previous Page
Next Page
Previous Page
Next Page
Accessories Instruction
Related Accessories